Irrigation Controller
The Irrigation Controller manages the irrigation system by controlling the water pumps and solenoid valves, that are part of the plant factory nutrient system.
• Display: 3.2″ HMI TET
• Solenoid Valve: 1 to 2 Inch 2/2 Way 220V AC Diaphragm Valve 2W-250- 25
• UVA (Radiation) Detection Wavelength Band: 315nm to 400nm
• Water Level Operating Range: 25cm – 4.5m
• Water Flow Rate (Inlet & Outlet): 10-200 Liter/min
• Water Pressure Resistance: 2Mpa 2Mpa
• Relay Switching Voltage (VAC): 230V 30A
• Relay Operating Voltage (VDC): 5V@30A
• Power Source: 230V AC, 5A
• Power Consumption: 60 Watts
• Operating Temperature Range: 0°C to 55’C (32°F to 125°F)
• Usage conditions: Avoid Direct Sunlight
Description
The Irrigation Controller manages the irrigation system by controlling the water pumps and solenoid valves, that are part of the plant factory nutrient system. Irrigation control in a plant factory needs careful attention when compared to soil-based systems, due to the smaller root zone volume, greater water-holding capacity, and a higher dissolved oxygen concentration in the nutrient solution. The controller can support up to 2 zones with each zone having a dedicated nutrient tank.
Reviews
There are no reviews yet.